Thank you very much Saurabhkumar Chaudhari for your comment and your good question :)
Your question is close to one of the questions in the competition exercises,
- The Working principle :
- Generating electricity from water flow inside the pipes.
- Converting kinetic energy into electrical energy.
- Using a design resembling the turbine inside the device and revolves by the movement of water in the pipes.
- Use of magnetic induction ( and can be use other methods that lowest cost).
- The use principle:
-Direct installation on the pipe line as part of the pipe.
Soon I will attach a complete video explaining all the details of the device and the detailed working principle and for prototype 3D animation.
I hope I answered a question because Mitchell did not ask the same question by commenting, and any question or issue please write it and I will answer any question, thank you very much my friend
Your idea is very excellent and will help you learn in different ages and in different countries. I suggest you write books to teach students in schools or university too, all the best
Really really a very wonderful idea and also important for the environment. Manufacture edible utensils is a futuristic idea especially for poor countries, I suggest you make this idea also for fast food utensils because they are too large in waste and cause damage to the environment.
Thank you very much Andile Nokuthaba Mpofu for your comment :)
We look forward to working to reach developing countries to use the device as it may be a good and innovative solution to generate electricity and be a low cost as well.
Thank you very much Saurabhkumar Chaudhari for your comment and your wonderful question :)
I would like to ask you a question and you will know the answer to your question from your reply, There are thousands of kilometers of plastic pipes in the world to transport water. You can search for these pipes in your country India.
Is it possible that all engineers and companies responsible for plastic pipes did not think about this ?!
My friend :) , I am a material engineer and a specialist Polymer Science (Plastic).
Plastic is considered a elastic material. Also, there is no friction between the surface of the water and the surface of the plastic pipe ! this is wrong information ! because the surface of the plastic pipes is smooth and the water is fluid ! how is there friction?
Plastic is not oxidized and is not corroded by water such as iron pipes that leave a small piece of oxidized iron which causes many problems for this plastic has been used instead of iron pipes, your question is outside the subject of my idea
but a very good question . The water inside the pipes is filtered so that there are no solid impurities even if there is a solid particles / impurities and impact in the surface of the plastic pipe it will be leave a trace or indentation but do not break the plastic.
You can find out more about plastics and the use of plastic pipes in transporting water, and for my questions to participants you can see my explanation below to Mitchell Hall :)
Thank you very much Tognibo Abdel Fréjus KENALI for your comment :)
The world also needs people like you to develop, innovate and help people, and this competition is a great opportunity to continue activities and work on ideas.
Thank you very much for your Mitchell Hall comment :)
At the beginning, I wrote, "I'm doing research about Entrepreneurship" This means I do research and study about entrepreneurship and collect feedback and answers about the questions I asked ( 1.Did you make the idea on your own or with the help of a team? , 2. Do you have a plan to find funding? Where do you start? Are companies or people targeted by your idea? ) and when collect feedback and answers then can be calculate and measuring percentage of similar and not similar answers to each other about whether the idea done by team or individual. This feedback and answers provides a very important answer to the success rate of ideas that may be individual work or group work. This This information increases the strength of my idea by working on weaknesses and strengthening them, and how to get support or other ways to get funding, and with these answers increases my understanding of how the entrepreneur works and also learns from them.
f you do a study or search by questions! It is impossible to do a research or study and to ask different questions to people should the questions unified, constant and similar ( Information form ) !
The reason for the study and research is:
1.Clarify your strengths.
2.Clarification of any additional useful targets or points reached during the course of the work.
3.Clarify the ways in which it can be taught to offer something new or something useful in a field.
4.Clarify whether there are any points that can be used in other aspects or in other areas.
Thank you very much for Rohit Kumar Sachdewani your comment and your wonderful question.
The device is considered as a piece of the pipes and this is one of its features.
According to preliminary calculations and experiences, the device produces 600 watts to 1 kW for the 3.5/3.7 inch diameter at a flow velocity of 100-131 L/S and the pressure that the device holds depends on the diameter of the pipes.
It is of course applicable to power generation in MW, but when some parts are developed and the material is modified to withstand a higher voltage.
The device can be used on sewage pipes, but on pipes that separate the sewage of at least the large solids, the surface of the device in the case of sewage pipes covered with a special layer that prevents adhesion.
Thank you very much Saurabhkumar Chaudhari for your comment and your very good question.
The device is made of 60% -70% of plastic, and If the device damaged will not harm the environment and can be recycled again, if the device faces any kind of problem then we have root cause analysis plan to fix the problem with the help of workers specialised in the pipeline. But in general, any problem with the device can be fixed simply and does not require much effort.
Thank you very much Dhruv Dave for your comment
Your idea AMM (Automatic Medical Machine) really is wonderful and helps people suggest you create partnerships
With companies interested in your field